My Quote

ABL Bathroom Vanity Sink Top

A ceramic ABL top to make the look of your bathroom complete. Stylish and unique, made-to-order bathroom top with properties of your preference. Our extensive range includes numerous stone imitations, patterns and colours to choose from.

A ceramic bathroom top can be installed onto a sink cabinet or furniture; ceramic cladding of the entire furniture is also possible. Walls and floors can be clad with the same material. All the necessary tap and pipe penetrations are pre-cut into the ceramic bathroom tops. The sink can be top-mounted or glued in place from below. We also offer recessed, ceramic-clad sinks.


Measuring and installation services are available from us in the Helsinki metropolitan area. You can order samples to help with design and download a comprehensive information package regarding our Cutting Studio services. Your inspiration, ideas and suggestions are welcome – we are here to support you in making your premises unforgettable.

Why is choosing a ceramic ABL Bathroom Vanity Top top a good idea?

Made in Finland. Ceramic sink tops are designed and manufactured to order in Finland, in our very own ABL Cutting Studio. Because of this, ceramic ABL tops bear the Key Flag Symbol as recognition of Finnish work. 

Custom made. The sink top is made according to your design; each top is unique. The sink top can be attached directly to the wall or installed onto sink furniture; cladding of the furniture is also possible. Walls and floors of the entire bathroom can be covered with the same material.  

100% natural. Ceramics are made of mineral clay, feldspar and sand. An environmentally friendly building and interior design material.  

ABL Cutting Studio manufactures ceramic tops and surfaces for bathrooms and toilets. The materials are delivered ready for installation, complete with the apertures and processing required.

All the necessary tap and pipe penetrations are pre-cut into the ceramic bathroom tops. The sink can be top-mounted or glued in place from below. We also offer recessed, ceramic-clad sinks. The ceramic top can be attached directly to bathroom or toilet wall or installed onto sink furniture; cladding of the bathroom furniture is also possible.

Ceramic Top 6/12mm Mounted onto Furniture
  • thin ceramic sink top for installation onto bathroom furniture
  • if necessary, the ceramic top is supported; a 6mm top requires a base plate, while a 12mm top can be installed directly onto the furniture frame 
  • visible top edges are bevelled and sanded 
  • the sink can be installed onto the top, the necessary penetrations are cut into the top
  • all the necessary bathroom fixture penetrations are pre-cut into the top
  • all of the furniture, walls and floors can also be clad with the same ceramic material
  • made to measure; options with two or more sinks are available
ABL keraaminen taso kylpyhuonekalusteen päälle asennettuna.
Massive Ceramic Top Mounted onto Furniture

 

  • top thickness can be chosen depending on the site; manufacture from 6mm or 12mm thick material
  • installed onto furniture
  • all the penetrations required are pre-cut in the worktop 
  • visible top edges are bevelled and sanded
  • the top can be top-mounted or glued in place from below. A recessed ceramic sink is possible as well (lower image)
  • all of the furniture, walls and floors can also be clad with the ceramic top material
  • made to measure; options with two or more sinks are available
ABL-Laatat - Kylpyhuone taso upotetulla keraamisella altaalla
Wall-mounted bathroom top
  • the top is fixed directly to the wall
  • visible top edges are bevelled and sanded
  • the top is compatible with top-mounted sinks, bottom-mounted glued sinks, lipped sinks or recessed ceramic sinks
  • all of the necessary apertures are pre-cut in the top
  • manufacture from 12mm and 6mm thick material
  • made to measure; options with several sinks are also available
ABL keraaminen taso tupla-altailla, seinään kiinnitettynä.
Sink bottom-mounted to ceramic top
  • allas asennetaan keraamisen kylpyhuonetason alapuolelle, suoraan tasoaukon alle
  • allas liimataan ja tuetaan alta
  • tasoaukon reunat viimeistellään ja hiotaan
  • allas asennetaan ABL-Leikkaamossa valmiiksi
  • kaikki tarvittavat läpiviennit leikataan tasoon valmiiksi
ABL tasoihin tarjottavat työstöt - alta kiinnitettävä allas
Top-mounted sink
  • allas asennetaan tason päälle
  • tason näkyvät reunat viimeistellään ja hiotaan
  • allas asennetaan ABL-Leikkaamossa valmiiksi
  • kaikki tarvittavat läpiviennit leikataan tasoon valmiiksi
Lip-mounted sink
  • tasoon leikataan huullos, johon altaan reunat asettuvat
  • pesultaan reunat ovat samalla tasolla kuin taso-materiaali
  • allashuulloksen maksimisyvyys 6,5 mm ja R 5, vain RST-altaille
  • vain 12mm:n tasomateriaaleille
  • kaikki tarvittavat läpiviennit leikataan tasoon valmiiksi
  • allas asennetaan työmaalla
 

 

Ceramic sink recessed in the top
  • valmistetaan samasta materiaalista kuin keraaminen ABL-taso
  • toimitetaan valmiiksi tasoon asennettuna
  • valmistetaan tilaustyönä
Upotettu keraaminen allas - ABL Leikkaamo
Furniture cladding
  • 3 mm ja 6 mm vahvuisille keraamisille laatoille
  • liimataan kiinni kalusteeseen
  • reunat viistetään ja hiotaan näkyviltä osin
  • valmistetaan tilaustyönä
Koko kylpyhuonekaluste voidaan verhoilla keraamisella laatalla.
Edge finishing
Reunan viimeistely suoraan
  • tason reunat viistetään ja hiotaan näkyviltä reunoilta
  • tasot kiinnitetään 90 asteen suorajiiriliitoksella kiinni, jolloin keraamisen laatan sivu näkyy reunassa
ABL-taso reunan voi viimeistellä suoraan.
Reunan viimeistely jiiriin
  • näkyvät tason reunat hiotaan ja viistetään
  • taso kiinnitetään jiiriin, jolloin näkyvissä on vain keraamisen materiaalin pinta
ABL-taso - reunan viimeistely jiiriin
Reunaprofiili
  • 2 mm:n viiste reunoihin
  • viimeistellään käsin
  • myös muut reunaprofiilit mahdollisia: L-mallinen massiivitasoreunaprofiili ja jiirireuna
ABL Leikkaamo - keraamiseen ABL-tasoon voi valita reunaprofiilin.

 

Pattern alignment

Kuvioiden kohdistus voidaan toteuttaa, mikäli se on projektissa tuotannollisesti mahdollista.

A comprehensive stock and order assortment for choosing the preferred sink top materials. Ceramic top blank size: 160x320cm. Worktop thickness options available: 12mm or 6mm.

ABL worktops are cut out of a large format tile according to the dimensions specified in the order. Click here to order colour samples.

Surface and colour deviations in products: Ceramic large tiles are made of natural materials, which means that various imperfections are possible in the surface of the tiles. These may include, for example, spots and marks differing from the background colour, minor holes, bulges and other similar deviations.

When using cleaning agents and means, proceed in compliance with the operating and safety instructions provided by the manufacturer. Before using a cleaning agent, test its compatibility on a loose part or small invisible area. Never use cleaning agents containing hydrofluoric acid or its compounds (fluorides). Such agents may damage ceramic worktops even if extensively diluted in water. Use of abrasive pastes, steel wool, metal spatulas, ceramic knives or similar abrasive or scratching agents or materials may damage the worktop surface.

Principles of ceramic ABL worktop cleaning

  1. Choose a cleaning agent of the right type (do not use cleaning products forming a protective film or waxy surface).
  2. Ensure long enough exposure time.
  3. If necessary, use a cleaning sponge or brush to intensify the cleaning.
  4. Carefully remove dirt separated from the surface by washing or vacuum cleaning.
  5. Rinse with clean water until any cleaning agent residues have been removed.
  6. Remove impurities sufficiently often and quickly to prevent them from sticking.
  7. Immediately remove any colourants, such as oils and fats (for example, hair dyes, essential oils, condiments and similar substances).

First cleaning after installation: be thorough, for this promotes easy cleaning of the worktop in the future as well. After worktop installation, remove any impurities from the surfaces. In most cases, a mild cleaning agent with hot water are sufficient for this. For intensive cleaning, see instructions below. Lastly, rinse the worktop and dry with a dry cloth.

Daily cleaning: Clean the worktop with a soft cloth, hot water, and a mild cleaning agent, if necessary. Lastly, rinse the worktop with water and dry with a dry cloth.

Intensive worktop cleaning: Avoid heavy chafing. Choose the cleaning agent and means depending on the dirt and the need for cleaning. Always rinse the worktop after cleaning and dry with a dry cloth. The properties of glossy-surfaced ceramic worktops differ substantially from those of matt-surfaced worktops. Do not use abrasive sponges when cleaning glossy worktops; keep in mind that the surfaces cannot withstand strongly alkaline (PH above 11) cleaning agents!